In our home decoreation , The Switch And Socket are the building materials could not be separated. It brings convenience to our daily electricity use. Many owners will complain about the la
ck of sockets and improper installation. Therefore, when installing a SWITCH SOCKET, it is recommended that you The actual needs of their own life to install, then how to switch socket ? Indoor space of the switch socket how to plan it?
How to connect the switch socket :
1. With the three-wire connection method of the switch socket, the fire wire, neutral wire and ground wire need to be correctly connected to the interface. First cut the insulators at the beginning of each of the three wires and cut them off. Do not injure the wire core. Then the wire should be connected to one of the two holes in the switch. Leave the other wire in the insulated wire and connect it to the socket below. Holes in the hole in the hole docking. The neutral wire is inserted into the N holes in the three holes of the socket. The ground wire is inserted into the E hole in the 3 holes of the socket.
2. Pass the wires left in the bottom box of the switch socket out of the outlet holes of the plastic platform, and then close the plastic platform to the wall and fix it on the bottom box with screws. Then thread the wire out of the corresponding switch socket hole, close the switch socket panel to the plastic platform, fix it with screws, and cover the decorative board.
How to plan the indoor switch socket :
1, entrance
It is recommended to reserve a socket and switch to facilitate the use of popular smart shoe cabinets in recent years. If the switch is used, it can be controlled with the switch of the living room, so that the light can be turned on and off at the entrance, which is very convenient.
2, living room
There are many electrical appliances used in the living room. It is recommended that you can reserve more ground sockets for ground cables, such as: TV (2), air conditioner (1), and sofa (1 each).
3, kitchen
There are also many appliances used in the kitchen, such as a smoke exhauster (1), a stove (1), a microwave oven (1), a disinfection cabinet (1), and a sink (1). The outlet can be installed for aesthetic reasons. Inside the cabinet, it is waterproof and beautiful.
4, bedroom
In the bedroom, it is recommended to set aside 5-6 switch sockets, such as: 1 side of the bed (1 each), TV (2), air conditioning (1) computer (1). Use the ground wire as much as possible, and use the socket at the bay window.
5, bathroom
The number of outlets in the bathroom is planned based on the number of oscillating discharge devices, such as: washing machine (1), hair dryer (1), electric water heater (1), and recommendations for the outlet of the bathroom cabinet or the side of the toilet should be splash-proof. Cover plate to prevent water from conductive burning.
Finnally above is the introduction of the switch socket for everyone how to connect and plan the indoor switch socket related content, I believe we look after the switch socket installation has a certain understanding, if you need to learn more about the late Knowledge, welcome to pay attention to this website information.
