How to plan and install SWITCH SOCKET ? Socket switch is the main mode of transmission of power, it is indispensable in life. Nowadays, there are a variety of outlet switches, and the shape and appearance design are more and more modern, which can well meet the needs of many consumers' home furnishings. The following small series introduced how to connect the outlet switch and how to plan the indoor switch socket.
How to connect the outlet switch
1, first cut off the beginning of the three lines, but can not hurt the core, then the fire wire into one of the two holes in the switch, leaving the other hole in the insulated wire access to the following three holes in the socket In the L hole in the line docking. While the neutral wire is inserted into the N hole among the three holes, the ground wire is inserted into the E hole of the three holes.
2. Put the wires left under the bottom box out of the plastic table outlet holes, and then close the plastic table to the wall, then fix it on the bottom box with screws, and finally thread the wire out of the hole in the switch socket. , Fix it with screws and cover the decorative plate.
How to plan indoor switch socket
1, entrance
The entrance is best to leave a socket and switch, the switch can be made with the living room switch to control, so that the entrance can also open the living room lights, very convenient.
2, the living room
The use of electrical appliances in the living room is more, it is best to stay on the ground to stay more outlets, such as: TV (2), air conditioning (1), sofa on both sides (1 each).
3, kitchen
There are many appliances used in the kitchen, so the socket switch can be prepared for several more. For the kitchen switch socket can choose a good waterproof performance, so that the use of more secure.
4, bedroom
For the bedroom, you can reserve 5-7 switch sockets. Use the ground wire as much as possible, and use the socket at the bay window.
5, bathroom
The toilet can be arranged three, washing machine (1) hair dryer (1) electric water heater (1), for the socket on the edge of the bathroom cabinet can choose to have a splash-proof cover to prevent touch water conductive burned.
Editor's summary: How to connect the socket switch and how to plan the indoor switch socket is introduced here, I hope to be helpful to everyone, want to learn more relevant knowledge can focus on this site information.
From Foshan shunde Langzhi