As you know The network socket
and the SWITCH SOCKET all use the same standard, and do not need to pay special attention to the wiring problem of the network cable module and the network cable crystal head. Of course, it is necessary to perform the wiring according to the normal wiring method. So how to wire the network socket? What are the dimensions of the network socket? The following small series will be introduced for everyone. How to wire the network socket
1. Remove the cable inside the wall (or the slot line) with a special wire stripper or wire stripper at a distance of about 10 cm from the offline head (or a longer length to facilitate the back pressure line). (Do not hurt the metal line).
2, the line, use the wire cutter to press the metal card slot into the network cable socket. Note: a. Some network cables are four white and orange green blue brown main color lines, instead of white and other color mixed white and main color lines, so be careful to put each group of two lines After that, remove the other lines. Otherwise, you can't know which one is white orange, white blue, white green, white brown. b. After each separation, do not press the line first, and wait for many lines to be placed. Use the same wire cutter to make the line. c. The wire cutter has internal and external points, and the outside is long. After hitting it, the excess line on the outside will be cut off. Therefore, if the outside is placed on the inside of the cable socket, the cable will be cut.
3. After the extra lines are cut off, the information module with the line is loaded onto the 86 box panel. There is also a line card behind the good network cable socket, so that it can protect the slight dragging of the network cable from falling off. However, most of them do not have a line card to protect the network cable socket, so be careful when placing the network cable socket on the wall and the socket panel. Do not pull the cable.
Introduction to the size of the switch socket
The switch size of type 1, 75 is the decoration product commonly used in China in the 1980s. The power facilities in that era are not very developed, so the decoration effect of the switch size will not be too much attention. Simple use is no problem, but If you say that the rumors of decoration are not enough. The size of the 75-type switch is 75*75mm, which has been eliminated due to many shortcomings.
2, 86 type switch size is the national standard, its size is: 86 * 86 * 16.5mm, its mounting hole center distance is 60.3mm, and now many areas are using 86 type switch size. Moreover, its great advantage is that it can be fixed on the wall with double-sided tape or screws, which is not only easy to lose, but also very simple and beautiful.
3, 118 type switch size is a wall switch with a simple decorative structure and a wide range of applications with a certain decorative effect. Its appearance is rectangular and its size can be combined with various functional components (such as sockets, switches, computers, TVs, etc.). The 118-type switch is horizontal in size and has a length of 118, 153, and 198 mm, and the height is 86 mm. And its bottom box is also available in three types: single, medium, and long.
4, 120 type switch size is vertical, there are two main types: one is small: 70 * 120mm; one is large double type: 120mm * 120mm. The 120-type switch is similar in size to the 118 model and can be freely combined, but the 120-type manual disassembly is more convenient. Its function module is divided into three types: 1 position, 1/3, 2/3. The empty position can also be filled with blank parts. It can be easily modified after other functions.
5, 146 type switch size is the extension of type 86, many countries are using the size of type 146: 86 * 146mm, its mounting hole center distance is 120.6mm. It can also be divided into 86 type switch sockets.
Edited by Langzhi
