Now Switch And Socket are more important for home decoration. The installation of switch sockets is not a small thing and cannot be installed at will. If it is not installed properly, it will lead to unnecessary troubles in our future home life. Switch and socket installations must take into account safety issues and consider our usual lifestyle. Then switch and socket installation to pay attention to what, what brand of SWITCH SOCKET is good, the following Xiao Bian will take you to see it together.
Switch socket installation precautions
1, switch socket height standard
Unless it is a special decoration and use, the switch and socket should generally be set according to the standard height. The height of the switch should be the height of an adult's shoulder and should be about 120-140cm above the ground.
2, switch installation location
The position of the switch should be determined according to the family's living habits. For example, most people use their right hand, so generally the home is open to the right and the switch is installed on the left side of the door. In addition, for the upper and lower floors of the stairs, there are two bedroom doors and a bedside. It is very convenient to use dual control switches on both sides of the larger living room.
3, switch socket installation away from the stove
When installing the socket in the kitchen, the socket socket must be kept away from the cooktop to prevent the heat from damaging the socket. In the close proximity of the bathroom, balcony, etc., the socket installation must not be low, and the splash guard should be used. Do not install any outlets in locations that are relatively humid, flammable, explosive gases, and dust.
4, high-power electrical appliances should use a separate outlet
Air-conditioning, washing machines, range hoods and other high-power electrical appliances are best to use a separate three-socket outlet to prevent excessive circuit power total tripping. For seasonal appliances such as air conditioners, switch sockets are available. When not in use, the switch can be closed without removing the plug.